|
Systematic Designs[2] |
|
|
|
|
Real-Time Solutions |
|
|
|
|
|
Tews Technologies' IndustryPack
Products |
|
| [Back to Table of Contents] |
|
|
IndustryPackÒ |
|
|
|
Motion Control |
|
|
|
Incremental Encoder Interface |
|
|
| TIP102-10 |
One Axis Incremental Motion
Controller IP |
|
|
|
High precision motion
controller, 24 bit counter (1.2MHz), 16bit D/A converter, 12 bit A/D
converter, 4 inputs , 3 outputs; Requires transition module TIP102-TM-1x;
Operating Temperature 0°C to +70°C |
|
|
| TIP102-11 |
One Axis Incremental Motion
Controller IP with Firmware |
|
|
|
Same as TIP102-10 but includes
run time license for the motion controller firmware ( existing customers only ) |
|
|
| TIP102-20 |
Two Axes Incremental Motion
Controller IP |
|
|
|
Same as TIP102-10 but two axes
on a single size IndustryPack; Requires transition module TIP102-TM-2x |
|
|
| TIP102-21 |
Two Axes Incremental Motion
Controller IP with Firmware |
|
|
|
Same as TIP102-20 but includes
run time license for the motion controller firmware ( existing customers only ) |
|
|
| TIP102-TM-10 |
One Axis Incremental TM |
|
|
|
Transition module for TIP102-10
or TIP102-11; Signal distribution to
three D-SUB connectors mounted
in front panel; Galvanic isolation of
the 24V inputs for limit and reference switches and of the outputs for servo
amplifier enable and current limits |
|
|
| TIP102-TM-11 |
One Axis Incremental TM;
Isolation Option 1 |
|
|
|
Same as TIP102-TM-10 but
additional galvanic isolation of the
encoder signals |
|
|
| TIP102-TM-12 |
One Axis Incremental TM;
Isolation Option 2 |
|
|
|
Same as TIP102-TM-10 but
additional galvanic isolation of the
encoder signals; Analog output signal isolated by an isolation amplifier,
powered by an on board DC/DC converter |
|
|
| TIP102-TM-13 |
One Axis Incremental TM;
Isolation Option 3 |
|
|
|
Same as TIP102-TM-10 but
additional galvanic isolation of the
encoder signals; Analog output signal and analog input isolated by an
isolation amplifier, powered by an on board DC/DC converter |
|
|
| TIP102-TM-20 |
Two Axes Incremental TM |
|
|
|
Transition module for TIP102-20
or TIP102-21; Signal distribution to
two sets of three D-SUB connectors
mounted in front panel; Galvanic isolation of the 24V inputs for limit and
reference switches and of the outputs for servo amplifier enable and current
limits |
|
|
| TIP102-TM-21 |
Two Axes Incremental TM;
Isolation Option 1 |
|
|
|
Same as TIP102-TM-20 but
additional galvanic isolation of the
encoder signals |
|
|
| TIP102-TM-22 |
Two Axes Incremental TM;
Isolation Option 2 |
|
|
|
Same as TIP102-TM-20 but
additional galvanic isolation of the
encoder signals; Analog output signal isolated by an isolation amplifier,
powered by an on board DC/DC converter |
|
|
| TIP102-TM-23 |
Two Axes Incremental TM;
Isolation Option 3 |
|
|
|
Same as TIP102-TM-20 but
additional galvanic isolation of the
encoder signals; Analog output signal and analog input isolated by an
isolation amplifier, powered by an on board DC/DC converter |
|
|
| TIP102-DOC |
User Documentation for TIP102 |
|
|
| TIP102-EK |
Engineering Kit for TIP102 |
|
|
|
Includes user documentation
TIP102-DOC; Schematics; Data sheets for ADC, DAC, counter |
|
|
| TIP102-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP102-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP102-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP102-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP102-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP102-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP102-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP102-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
|
|
| TIP120-10 |
Two Axes Incremental Motion
Controller IP with LM628 |
|
|
|
Low cost two axes motion
controller based on two LM628; 12 bit D/A converter; 32 bit position,
velocity and acceleration register per axis; 3 inputs and 1 output
galvanically isolated per axis; No transition module required; Operating
Temperature 0°C to +70°C |
|
|
| TIP120-11 |
One Axis Incremental Motion
Controller IP with LM628 |
|
|
|
Low cost one axis motion
controller based on LM628; 12 bit D/A converter; 32 bit position, velocity
and acceleration register; 3 inputs and 1 output galvanically isolated; No
transition module required; Operating Temperature 0°C to +70°C |
|
|
| TIP120-20 |
Two Axes Incremental Motion
Controller IP with LM629 |
|
|
|
Low cost two axes motion
controller based on two LM629; 8 bit PWM output; 32 bit position, velocity
and acceleration register per axis; 3 inputs and 1 output galvanically
isolated per axis; No transition module required; Operating Temperature 0°C
to +70°C |
|
|
| TIP120-21 |
One Axis Incremental Motion
Controller IP with LM629 |
|
|
|
Low cost one axis motion
controller based on LM629; 8 bit PWM output; 32 bit position, velocity and
acceleration register; 3 inputs and 1 output galvanically isolated; No
transition module required; Operating Temperature 0°C to +70°C |
|
|
| TIP120-30 |
Two Axes Incremental Motion
Controller IP with LM628/LM629 |
|
|
|
Low cost two axes motion
controller based on one LM629; 8 bit PWM output; and one LM628 with 12 bit
D/A converter; 32 bit position, velocity and acceleration register; 3 inputs
and 1 output galvanically isolated; No transition module required; Operating Temperature
0°C to +70°C |
|
|
| TIP120-DOC |
User Documentation for TIP120 |
|
|
| TIP120-EK |
Engineering Kit for TIP120 |
|
|
|
Includes user documentation
TIP120-DOC; Schematics; Data sheets for motion controller; 50 pin terminal
block; 50 pin flat cable. |
|
|
| TIP120-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP120-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP120-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP120-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP120-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP120-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP120-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP120-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
Absolute Encoder Interface |
|
|
| TIP111-10 |
One Axis Absolute (SSI) Motion
Controller IP |
|
|
|
High precision motion
controller; 32 bit synchronous serial encoder interface (SSI); 16bit D/A
converter, 12 bit A/D converter, 4 inputs , 3 outputs; Requires transition module TIP111-TM -1x; Operating
Temperature 0°C to +70°C |
|
|
| TIP111-11 |
One Axis Absolute (SSI) Motion
Controller IP with Firmware |
|
|
|
Same as TIP111-10 but includes
run time license for the motion controller firmware ( existing customers only ) |
|
|
| TIP111-20 |
Two Axes Absolute (SSI) Motion
Controller IP |
|
|
|
Same as TIP111-10 but two axes
on a single size IndustryPack; Requires transition module TIP111-TM-2x |
|
|
| TIP111-21 |
Two Axes Absolute (SSI) Motion
Controller IP with Firmware |
|
|
|
Same as TIP111-20 but includes
run time license for the motion controller firmware ( existing customers only ) |
|
|
| TIP111-TM-10 |
One Axis Absolute TM |
|
|
|
Transition module for TIP111-10
or TIP111-11; Signal distribution to
three D-SUB connectors mounted
in front panel; Galvanic isolation of
the 24V inputs for limit and reference switches and of the outputs for servo
amplifier enable and current limits |
|
|
| TIP111-TM-11 |
One Axis Absolute TM; Isolation
Option 1 |
|
|
|
Same as TIP111-TM-10 but
additional galvanic isolation of the
encoder signals |
|
|
| TIP111-TM-12 |
One Axis Absolute TM; Isolation
Option 2 |
|
|
|
Same as TIP111-TM-10 but
additional galvanic isolation of the
encoder signals; Analog output signal isolated by an isolation amplifier,
powered by an on board DC/DC converter |
|
|
| TIP111-TM-13 |
One Axis Absolute TM; Isolation
Option 3 |
|
|
|
Same as TIP111-TM-10 but
additional galvanic isolation of the
encoder signals; Analog output signal and analog input isolated by an
isolation amplifier, powered by an on board DC/DC converter |
|
|
| TIP111-TM-20 |
Two Axes Absolute TM |
|
|
|
Transition module for TIP111-20
or TIP111-21; Signal distribution to
two sets of three D-SUB connectors
mounted in front panel; Galvanic
isolation of the 24V inputs for limit and reference switches and of the
outputs for servo amplifier enable and current limits |
|
|
| TIP111-TM-21 |
Two Axes Absolute TM; Isolation
Option 1 |
|
|
|
Same as TIP111-TM-20 but
additional galvanic isolation of the
encoder signals |
|
|
| TIP111-TM-22 |
Two Axes Absolute TM; Isolation
Option 2 |
|
|
|
Same as TIP111-TM-20 but
additional galvanic isolation of the
encoder signals; Analog output signal isolated by an isolation amplifier,
powered by an on board DC/DC converter |
|
|
| TIP111-TM-23 |
Two Axes Absolute TM; Isolation
Option 3 |
|
|
|
Same as TIP111-TM-20 but
additional galvanic isolation of the
encoder signals; Analog output signal and analog input isolated by an
isolation amplifier, powered by an on board DC/DC converter |
|
|
| TIP111-DOC |
User Documentation for TIP111 |
|
|
| TIP111-EK |
Engineering Kit for TIP111 |
|
|
|
Includes user documentation
TIP111-DOC; Schematics; Data sheets for ADC, DAC |
|
|
| TIP111-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP111-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP111-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP111-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP111-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP111-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP111-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP111-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
|
|
| TIP114-10 |
10 Channel Absolute
Encoder ( SSI ) Interface |
|
|
|
10 independent absolute encoder
( SSI ) interfaces, programmable clock rate from 1 µs to 15 µs and data bits
from 1 to 32 bit; Binary or Gray code; even,odd or no parity; data inputs
galvanically isolated |
|
|
| TIP114-DOC |
User Documentation for TIP114 |
|
|
| TIP114-EK |
Engineering Kit for TIP114 |
|
|
|
Includes user documentation
TIP114-DOC; Schematics; Data sheets; 50 pin terminal block; 50 pin flat
cable. |
|
|
| TIP114-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP114-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP114-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP114-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP114-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP114-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP114-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP114-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
Synchro / Resolver Interface |
|
|
| TIP150-30 |
Synchro / Resolver Interface 4
arcmin IP |
|
|
|
One channel tracking
Resolver-Digital-Converter; Programmable resolution 10, 12, 14 or 16 bit;
Converter accuracy 4 arcmin + 1 LSB; Bandwidth adjustable; Analog velocity
output, built-in-test-output; Operating Temperature 0°C to +70°C |
|
|
|
Requires a TIP150-Ay-xx signal
conditioning adapter |
|
|
| TIP150-31 |
Synchro / Resolver Interface 2
arcmin IP |
|
|
|
Same as TIP150-30 but converter
accuracy 2 arcmin; |
|
|
| Requires
a TIP150-Ay-xx signal conditioning adapter |
|
|
| TIP150-40 |
Dual Synchro / Resolver
Interface 4 arcmin IP |
|
|
|
Two channel tracking
Resolver-Digital-Converter; Programmable resolution 10, 12, 14 or 16 bit;
Converter accuracy 4 arcmin + 1 LSB; Bandwidth adjustable; Analog velocity
output, built-in-test-output; Operating Temperature 0°C to +70°C |
|
|
|
Requires a TIP150-Ay-xx signal
conditioning adapter for each channel |
|
|
| TIP150-41 |
Dual Synchro / Resolver
Interface 2 arcmin IP |
|
|
|
Same as TIP150-40 but converter
accuracy 2 arcmin; |
|
|
| Requires
a TIP150-Ay-xx signal conditioning adapter for each channel |
|
|
| TIP150-A1-xx |
Resolver Signal Conditioning
Adapter |
|
|
|
Must specify signal and
reference voltage at time of order |
|
|
| TIP150-A2-xx |
Resolver Signal Conditioning
Adapter with Reference Oscillator |
|
|
|
Must specify signal voltage,
reference voltage and reference frequency at time of order |
|
|
| TIP150-A3-xx |
High Precision Synchro /
Resolver Signal Conditioning Adapter |
|
|
|
Must specify signal and
reference voltage at time of order |
|
|
| TIP150-A4-xx |
High Precision Synchro /
Resolver Signal Conditioning Adapter with Reference Oscillator |
|
|
|
Must specify signal voltage,
reference voltage and reference frequency at time of order |
|
|
| TIP150-DOC |
User Documentation for TIP150 |
|
|
| TIP150-EK |
Engineering Kit for TIP150 |
|
|
|
Includes user documentation
TIP150-DOC; Schematics; Data sheets for resolver converter, reference
oscillator; 50 pin terminal block; 50 pin flat cable |
|
|
| TIP150-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP150-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP150-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP150-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP150-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP150-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP150-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP150-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
Digital I/O |
|
|
|
Isolated Input |
|
|
| TIP600-10 |
16 Digital Input IP |
|
|
|
16 digital inputs, 24V DC,
optically isolated; Fully programmable interrupt capabilities; Electron.
Debounce; Operating Temperature 0°C to +70°C |
|
|
| TIP600-DOC |
User Documentation for TIP600 |
|
|
| TIP600-EK |
Engineering Kit for TIP600 |
|
|
|
Includes user documentation
TIP600-DOC; Schematics; Data sheets for interrupt controller; 50 pin terminal
block; 50 pin flat cable |
|
|
| TIP600-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP600-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP600-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP600-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP600-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP600-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP600-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP600-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
|
|
| TIP605-10 |
16 Digital Input IP |
|
|
|
16 digital inputs, 24V DC,
optically isolated; Fully programmable interrupt capabilities; Electron.
Debounce; Operating temperature -40 °C to +85 °C |
|
|
| TIP605-DOC |
User Documentation for TIP605 |
|
|
| TIP605-EK |
Engineering Kit for TIP605 |
|
|
|
Includes user documentation
TIP605-DOC; Schematics; 50 pin terminal block; 50 pin flat cable |
|
|
| TIP605-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP605-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP605-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP605-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP605-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP605-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP605-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP605-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
|
|
| TIP606-10 |
16 Isolated Digital Inputs for
Avionic Applications |
|
|
|
16 digital inputs designed for
avionic applications, Input voltage typ. 28V, max 42V, optically isolated;
Differential high impedance input ( typ. 118 kW ); Input threshold for High Level typ. >14V; Input threshold
for Low Level typ. <3,5V; Fully programmable interrupt capabilities;
Electron. Debounce; Operating Temperature -40°C to +85°C |
|
|
| TIP606-DOC |
User Documentation for TIP606 |
|
|
| TIP606-EK |
Engineering Kit for TIP606 |
|
|
|
Includes user documentation
TIP606-DOC; Schematics; 50 pin terminal block; 50 pin flat cable |
|
|
| TIP606-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP606-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP606-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP606-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP606-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP606-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP606-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP606-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
Isolated Mixed Input / Output |
|
|
| TIP670-10 |
8 Digital Input, 8 Digital
Output IP |
|
|
|
8 digital inputs, 24V DC,
optically isolated, fully programmable interrupt capabilities, electron.
debounce; 8 digital outputs, 24V DC 0.5 A, optically isolated; Channels are
isolated against each other in sets of two; Each channel can be configured as
high side switch or as low side switch; Overload and short circuit
protection; Operating Temperature 0°C to +70°C |
|
|
| TIP670-20 |
4 Digital Input, 4 Digital
Output IP |
|
|
|
Same as TIP670-10, but 4 digital
inputs and 4 digital outputs |
|
|
| TIP670-DOC |
User Documentation for TIP670 |
|
|
| TIP670-EK |
Engineering Kit for TIP670 |
|
|
|
Includes user documentation
TIP670-DOC; Schematics; Data sheets for interrupt controller; 50 pin terminal
block; 50 pin flat cable |
|
|
| TIP670-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP670-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP670-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP670-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP670-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP670-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP670-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP670-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
Isolated Output |
|
|
| TIP700-10 |
16 Digital Output IP |
|
|
|
16 digital outputs, 24V DC 0.5
A, optically isolated; Channels are isolated against each other in sets of
two; Each channel can be configured as high side switch or as low side
switch; Overload and short circuit protection; Operating Temperature 0°C to +70°C |
|
|
| TIP700-20 |
8 Digital Output IP |
|
|
|
same as TIP700-10 but 8 outputs |
|
|
| TIP700-DOC |
User Documentation for TIP700 |
|
|
| TIP700-EK |
Engineering Kit for TIP700 |
|
|
|
Includes user documentation
TIP700-DOC; Schematics; 50 pin terminal block; 50 pin flat cable |
|
|
| TIP700-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP700-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP700-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP700-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP700-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP700-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP700-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP700-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
TTL I/O |
|
|
| TIP610-10 |
TTL I/O IP |
|
|
|
20 digital TTL I/O’s based on
Zilog Z8536 controller arranged as two 8-bit I/O ports and a 4-bit control
port; Operating Temperature 0°C to +70°C |
|
|
| TIP610-DOC |
User Documentation for TIP610 |
|
|
| TIP610-EK |
Engineering Kit for TIP610 |
|
|
|
Includes user documentation
TIP610-DOC; Schematics; Data sheets for interrupt controller; 50 pin terminal
block; 50 pin flat cable |
|
|
| TIP610-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP610-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP610-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP610-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP610-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP610-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP610-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP610-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
Field Bus |
|
|
|
CAN Bus |
|
|
| TIP810-10 |
CAN Bus IP |
|
|
|
CAN Bus Controller based on
SJA1000; Physical interface optically isolated; CAN-HIGH-SPEED ( ISO11898 )
or modified RS485; Operating Temperature -40°C to +85°C |
|
|
| TIP810-DOC |
User Documentation for TIP810 |
|
|
| TIP810-EK |
Engineering Kit for TIP810 |
|
|
|
Includes user documentation
TIP810-DOC; Schematics; Data sheets for CAN controller; Flat cable with DB9
connectors in CiA pinout |
|
|
| TIP810-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP810-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP810-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP810-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP810-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP810-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP810-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP810-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
|
|
| TIP816-10 |
CAN Bus IP |
|
|
|
CAN Bus Controller supports
both, standard and extended frames according to CAN specification 2.0 part A
and B; Physical interface optically isolated; CAN-HIGH-SPEED ( ISO11898 ) or
modified RS485; Operating temperature -40 °C to +85 °C |
|
|
| TIP816-DOC |
User Documentation for TIP816 |
|
|
| TIP816-EK |
Engineering Kit for TIP816 |
|
|
|
Includes user documentation
TIP816-DOC; Schematics; Data sheets for CAN controller; Flat cable with DB9
connectors in CiA pinout |
|
|
| TIP816-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP816-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP816-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP816-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP816-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP816-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP816-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP816-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
|
|
| TIP818-10 |
Fault-Tolerant Extended CAN Bus
IP |
|
|
|
CAN Bus Controller supports
both, standard and extended frames according to CAN specification 2.0 part A
and B; Physical interface optically isolated; Philips Fault-Tolerant CAN
Transceiver TJA1053; Operating temperature -40 °C to +85 °C |
|
|
| TIP818-DOC |
User Documentation for TIP818 |
|
|
| TIP818-EK |
Engineering Kit for TIP818 |
|
|
|
Includes user documentation
TIP818-DOC; Schematics; Data sheets for CAN controller; Flat cable with DB9
connectors in CiA pinout |
|
|
| TIP818-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP818-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP818-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP818-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP818-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP818-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP818-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP818-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
|
|
| TIP903-10 |
CAN Bus IP with three i82527 CAN
Controller |
|
|
|
Three CAN Bus Controller
supporting both, standard and extended frames according to CAN specification
2.0 part A and B; Physical interface: CAN-HIGH-SPEED ( ISO11898 ); Operating
Temperature 0°C to +70°C |
|
|
| TIP903-DOC |
User Documentation for TIP903 |
|
|
| TIP903-EK |
Engineering Kit for TIP903 |
|
|
|
Includes user documentation
TIP903-DOC; Schematics; Data sheets for CAN controller; Flat cable with DB9
connectors in CiA pinout |
|
|
| TIP903-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP903-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP903-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP903-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP903-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP903-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP903-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP903-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
INTERBUS |
|
|
| TIP811-10 |
INTERBUS Master G3 IP |
|
|
|
Local 68332 running the original
Generation 3 ( G3 ) INTERBUS firmware of PHOENIX; Supports up to 128 I/O
modules and up to 2048 I/O points; Requires TIP811-TM-10 transition module;
Operating Temperature 0°C to +70°C |
|
|
| TIP811-TM-10 |
INTERBUS Transition Module |
|
|
|
Transition module for TIP811
with isolated RS485 INTERBUS interface; Status LED's; RS232 diagnostic port |
|
|
| TIP811-DOC |
User Documentation for TIP811 |
|
|
| TIP811-EK |
Engineering Kit for TIP811 |
|
|
|
Includes user documentation
TIP811-DOC; Schematics |
|
|
| TIP811-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP811-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP811-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP811-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP811-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP811-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP811-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP811-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
SERCOS |
|
|
| TIP812-10 |
SERCOS IP |
|
|
|
SERCOS-Bus Interface using the
SERCON410 controller chip; On board RS485 interface; Transition module for
fiber optic available ( TIP812-TM-10 ); Operating temperature -40 °C to +85
°C |
|
|
| TIP812-20 |
SERCOS IP |
|
|
|
SERCOS-Bus Interface using the
SERCON410 controller chip; Two encoder interfaces for hand wheel support;
Transition module required (
TIP812-TM-20 ); Operating temperature -40 °C to +85 °C |
|
|
| TIP812-TM-10 |
SERCOS Fiber Optic Transition
Module |
|
|
|
Transition module for TIP812-10
with connector for optical fiber ring; Operating temperature -40 °C to +85 °C |
|
|
| TIP812-TM-20 |
SERCOS Fiber Optic Transition
Module |
|
|
|
Transition module for TIP812-20
with connector for optical fiber ring and interface for two encoders to
provide hand wheel capability. 9 pol D-SUB connector for each encoder;
Operating temperature -40 °C to +85 °C |
|
|
| TIP812-TM-21 |
SERCOS Fiber Optic Transition
Module |
|
|
|
As TIP812-TM-20 but optically
isolated encoder interfaces; Operating temperature -40 °C to +85 °C |
|
|
| TIP812-DOC-10 |
User Documentation for TIP812-10 |
|
|
| TIP812-DOC-20 |
User Documentation for TIP812-20 |
|
|
| TIP812-EK |
Engineering Kit for TIP812-10
and TIP812-20 |
|
|
|
Includes user documentation
TIP812-DOC; Schematics; Data sheets for SERCON410 controller |
|
|
| TIP812-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP812-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP812-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP812-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP812-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP812-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP812-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP812-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
LON |
|
|
| TIP813-10 |
LON-BUS
RS485 IP |
|
|
|
LON bus Interface based on
Neuron Chip 3150; 4 Kbytes dual port RAM; 32 Kbytes EPROM for protocol
firmware and application; RS485; Includes MIP/DPR license; Operating
Temperature 0°C to +70°C |
|
|
| TIP813-20 |
LON-BUS
1.25 MBit IP |
|
|
|
Same as TIP813-10 but 1.25 MBit
transformer coupled interface; No RS485 |
|
|
| TIP813-21 |
LON-BUS
78 kBit IP |
|
|
|
Same as TIP813-10 but 78 kBit
transformer coupled interface; No RS485 |
|
|
| TIP813-30 |
LON-BUS 78 kBit FTT-10A IP |
|
|
|
Same as TIP813-10 but 78
kBit Free Topology Twisted Pair Interface based on the ECHELON FTT-10A
transceiver; No RS485 |
|
|
| TIP813-TM-10 |
Optically Isolated RS485
Transition Module |
|
|
|
Transition module for TIP813-10;
Provides optically isolated RS485 interface; DC/DC converter; SUB-D connector |
|
|
| TIP813-DOC |
User Documentation for TIP813 |
|
|
| TIP813-EK |
Engineering Kit for TIP813 |
|
|
|
Includes user documentation
TIP813-DOC; Schematics; 50 pin
terminal block; 50 pin flat cable |
|
|
| TIP813-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP813-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP813-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP813-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP813-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP813-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP813-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP813-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
ARCNET |
|
|
| TIP815-10 |
ARCNET Traditional Interface IP |
|
|
|
COM20020 ARCNET controller, 2.5
Mbps; Traditional hybrid interface on IP; Operating Temperature 0°C to +70°C |
|
|
| TIP815-11 |
ARCNET Traditional Interface IP |
|
|
|
As TIP815-10 but 5 Mbps |
|
|
| TIP815-20 |
ARCNET RS485 Interface IP |
|
|
|
COM20020 ARCNET controller, 2.5
Mbps; Isolated RS485 interface on IP; Operating Temperature 0°C to +70°C |
|
|
| TIP815-21 |
ARCNET RS485 Interface IP |
|
|
|
As TIP815-20 but 5 Mbps |
|
|
| TIP815-TM-10 |
BNC Transition Module |
|
|
|
Transition module for
TIP815-10/-11; Provides BNC connector; 50 pin flat cable |
|
|
| TIP815-DOC |
User Documentation for TIP815 |
|
|
| TIP815-EK |
Engineering Kit for TIP815 |
|
|
|
Includes user documentation
TIP815-DOC; Schematics; Data sheets for ARCNET controller; 50 pin terminal block; 50 pin flat cable |
|
|
| TIP815-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP815-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP815-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP815-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP815-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP815-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP815-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP815-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
Analog I/O |
|
|
|
Isolated Multiplexed ADC |
|
|
| TIP500-10 |
16 Channel Isolated 12 bit A/D
IP |
|
|
|
16 single ended or 8
differential channels of isolated 12 bit A/D conversion; Data acquisition and
conversion time up to 10 µs without
channel / gain change and up to 12.5 µs with channel / gain change; +/- 10V inputs; Programmable gain of
1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board;
Operating temperature -40 °C to +85 °C |
|
|
| TIP500-11 |
16 Channel Isolated 12 bit A/D
IP |
|
|
|
Same as TIP500-10 but
programmable gain of 1, 2, 4, 8 |
|
|
| TIP500-20 |
16 Channel Isolated 12 bit A/D
IP |
|
|
|
16 single ended or 8
differential channels of isolated 12 bit A/D conversion; Data acquisition and
conversion time up to 10 µs without
channel / gain change and up to 12.5 µs with channel / gain change; 0 - 10V inputs; Programmable gain of
1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board;
Operating temperature -40 °C to +85 °C |
|
|
| TIP500-21 |
16 Channel Isolated 12 bit A/D
IP |
|
|
|
Same as TIP500-20 but
programmable gain of 1, 2, 4, 8 |
|
|
| TIP500-DOC |
User Documentation for TIP500 |
|
|
| TIP500-EK |
Engineering Kit for TIP500 |
|
|
|
Includes user documentation
TIP500-DOC; Schematics; Data sheets for ADC,
PGA, MUX; 50 pin terminal block; 50 pin flat cable |
|
|
| TIP500-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP500-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP500-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP500-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP500-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP500-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP500-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP500-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
|
|
| TIP501-10 |
16 Channel Isolated 16 bit A/D
IP |
|
|
|
16 single ended or 8
differential channels of isolated 16 bit A/D conversion; Data acquisition and
conversion time up to 12 µs without
channel / gain change and up to 14.5 µs with channel / gain change; +/- 10V inputs; Programmable gain of
1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board;
Operating temperature -40 °C to +85 °C |
|
|
| TIP501-11 |
16 Channel Isolated 16 bit A/D
IP |
|
|
|
Same as TIP501-10 but
programmable gain of 1, 2, 4, 8 |
|
|
| TIP501-20 |
16 Channel Isolated 16 bit A/D
IP |
|
|
|
16 single ended or 8
differential channels of isolated 16 bit A/D conversion; Data acquisition and
conversion time up to 12 µs without
channel / gain change and up to 14.5 µs with channel / gain change; 0 - 10V inputs; Programmable gain of
1, 2, 5, 10; Factory calibrated gain and offset; DC/DC converter on board;
Operating temperature -40 °C to +85 °C |
|
|
| TIP501-21 |
16 Channel Isolated 16 bit A/D
IP |
|
|
|
Same as TIP501-20 but
programmable gain of 1, 2, 4, 8 |
|
|
| TIP501-DOC |
User Documentation for TIP501 |
|
|
| TIP501-EK |
Engineering Kit for TIP501 |
|
|
|
Includes user documentation
TIP501-DOC; Schematics; Data sheets for ADC,
PGA, MUX; 50 pin terminal block; 50 pin flat cable |
|
|
| TIP501-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP501-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP501-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP501-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP501-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP501-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP501-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP501-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
Isolated DAC |
|
|
| TIP550-10 |
8 Channel Isolated 12 bit D/A IP |
|
|
|
8 channels of isolated 12 bit
D/A conversion; Settling time to 0.01% typ. 13 µs; +/- 10V or 0-10V
output; Factory calibrated gain and
offset; DC/DC converter on board; Operating temperature -40 °C to +85 °C |
|
|
| TIP550-11 |
4 Channel Isolated 12 bit D/A IP |
|
|
|
4 channels of isolated 12 bit
D/A conversion; Settling time to 0.01% typ. 13 µs; +/- 10V or 0-10V
output; Factory calibrated gain and
offset, DC/DC converter on board, Operating temperature -40 °C to +85 °C |
|
|
| TIP550-DOC |
User Documentation for TIP550 |
|
|
| TIP550-EK |
Engineering Kit for TIP550 |
|
|
|
Includes user documentation
TIP550-DOC; Schematics; Data sheets for ADC,
PGA, MUX; 50 pin terminal block; 50 pin flat cable |
|
|
| TIP550-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP550-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP550-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP550-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP550-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP550-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP550-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP550-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
|
|
| TIP551-10 |
4 Channel Isolated 16 bit D/A IP |
|
|
|
4 channels of isolated 16 bit
D/A conversion; Settling time to 0.003% typ. 10 µs; +/- 10V or 0-10V
output; Factory calibrated gain and
offset, DC/DC converter on board, Operating temperature -40 °C to +85 °C |
|
|
| TIP551-DOC |
User Documentation for TIP551 |
|
|
| TIP551-EK |
Engineering Kit for TIP551 |
|
|
|
Includes user documentation
TIP551-DOC; Schematics; Data sheets for ADC,
PGA, MUX; 50 pin terminal block; 50 pin flat cable |
|
|
| TIP551-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP551-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP551-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP551-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP551-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP551-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP551-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP551-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
Isolated DAC / Multiplexed ADC |
|
|
| TIP570-10 |
16 Chan. Isolated 12 bit A/D and
8 Chan. Isolated 12 bit DAC IP |
|
|
|
16 single ended or 8
differential channels of isolated 12 bit A/D conversion; Data acquisition and
conversion time up to 10 µs without
channel / gain change and up to 12.5 µs with channel / gain change; +/- 10V
inputs; Programmable gain of 1, 2, 5, 10; 8 channels of isolated 12 bit D/A
conversion; Settling time to 0.01% typ. 5 µs; +/- 10V outputs Factory calibrated gain and offset; DC/DC
converter on board; Operating temperature -40 °C to +85 °C |
|
|
| TIP570-DOC |
User Documentation for TIP570 |
|
|
| TIP570-EK |
Engineering Kit for TIP570 |
|
|
|
Includes user documentation
TIP570-DOC; Schematics; Data sheets for DAC, ADC, PGA, MUX; 50 pin terminal block; 50 pin flat cable |
|
|
| TIP570-IO-10 |
Mounting
Rail I/O Module |
|
|
|
Mounting Rail I/O module for
TIP570, provides 50 terminals, 50 pin flatcable |
|
|
| TIP570-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP570-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP570-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP570-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP570-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP570-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP570-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP570-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
Simultaneous Sampling ADC |
|
|
| TIP830-10 |
8 Channel 12 bit Simultaneous
Sampling A/D IP |
|
|
|
8 single ended channels of 12
bit A/D conversion, simultaneous sampling and converting; +/- 10V inputs; Up
to 40K samples per second; Factory calibrated gain and offset; External
trigger-I/O-pin; Operating Temperature 0°C to +70°C |
|
|
| TIP830-20 |
8 Channel 16 bit Simultaneous
Sampling A/D IP |
|
|
|
As TIP830-10 but 16 bit
resolution |
|
|
| TIP830-DOC |
User Documentation for TIP830 |
|
|
| TIP830-EK |
Engineering Kit for TIP830 |
|
|
|
Includes user documentation
TIP830-DOC; Schematics; Data sheets for ADC; 50 pin terminal block; 50 pin
flat cable |
|
|
| TIP830-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP830-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP830-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP830-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP830-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP830-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP830-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP830-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
Multiplexed ADC |
|
|
| TIP840-10 |
8 Channel 12 bit A/D IP |
|
|
|
8 single ended channels of 12
bit A/D conversion; Data acquisition and conversion time up to 10 µs without channel / gain change
and up to 34 µs with channel / gain change; +/- 10V inputs; Programmable gain
of 1, 10, 100; Factory calibrated gain and offset; Operating Temperature 0°C
to +70°C |
|
|
| TIP840-11 |
8 Channel 12 bit A/D IP |
|
|
|
Same as TIP840-10 but
programmable gain of 1, 2, 4, 8 |
|
|
| TIP840-20 |
16 Channel 12 bit A/D IP |
|
|
|
16 single ended or 8
differential channels of 12 bit A/D conversion; Data acquisition and
conversion time up to 10 µs without
channel / gain change and up to 34 µs with channel / gain change; +/- 10V
inputs; Programmable gain of 1, 10, 100; Factory calibrated gain and offset;
Operating Temperature 0°C to +70°C |
|
|
| TIP840-21 |
16 Channel 12 bit A/D IP |
|
|
|
Same as TIP840-20 but
programmable gain of 1, 2, 4, 8 |
|
|
| TIP840-DOC |
User Documentation for TIP840 |
|
|
| TIP840-EK |
Engineering Kit for TIP840 |
|
|
|
Includes user documentation
TIP840-DOC; Schematics; Data sheets for ADC,
PGA, MUX; 50 pin terminal block; 50 pin flat cable |
|
|
| TIP840-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP840-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP840-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP840-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP840-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP840-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP840-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP840-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
Mixed ADC / DAC |
|
|
| TIP850-10 |
16 Channel 12 bit A/D, 4 Channel
D/A IP |
|
|
|
16 single ended or 8
differential channels of 12 bit A/D conversion; Data acquisition and
conversion time up to 10 µs without
channel / gain change and up to 34 µs with channel / gain change; +/- 10V
inputs; Programmable gain of 1, 10, 100; Factory calibrated gain and offset;
4 12 bit D/A converter, settling time to 0.01% max. 6 µs; + /- 10V outputs,
factory calibrated; Operating Temperature 0°C to +70°C |
|
|
| TIP850-11 |
16 Channel 12 bit A/D, 4 Channel
D/A IP |
|
|
|
Same as TIP850-10 but
programmable gain of 1, 2, 4, 8 |
|
|
| TIP850-DOC |
User Documentation for TIP850 |
|
|
| TIP850-EK |
Engineering Kit for TIP850 |
|
|
|
Includes user documentation
TIP850-DOC; Schematics; Data sheets for ADC, DAC, PGA, MUX; 50 pin terminal
block; 50 pin flat cable |
|
|
| TIP850-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); C subroutine library; Source code; Programmer documentation |
|
|
| TIP850-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP850-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP850-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP850-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP850-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP850-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP850-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
Communication |
|
|
|
4 Channel Serial |
|
|
| TIP865-10 |
4 Channel Serial RS232 IP |
|
|
|
4 channels of high performance
multi-mode serial RS232 interface; Programmable baud rates up to 2 MBit/s,
async or synchronous protocols; Vectored interrupt; Support of full modem
controls: RxD, TxD, DTR, DCD, RTS, CTS, clock; Operating Temperature 0°C to
+70°C |
|
|
| TIP865-11 |
4 Channel Serial TTL IP |
|
|
|
Same as TIP865-10 but TTL signals;
RxD, TxD, DTR, DCD, RTS, CTS, Clock |
|
|
| TIP865-20 |
4 Channel Serial RS422 IP |
|
|
|
Same as TIP865-10 but RS422
signals; RxD+/-, TxD+/-, Clock+/- |
|
|
| TIP865-30 |
4 Channel Serial RS485 IP |
|
|
|
Same as TIP865-10 but RS485
signals and programmable baud rates up to 4 MBit/s |
|
|
| TIP865-DOC |
User Documentation for TIP865 |
|
|
| TIP865-EK |
Engineering Kit for TIP865 |
|
|
|
Includes user documentation
TIP865-DOC; Schematics; Data sheets for DUART controller; Flat cable with DB9
connectors PC AT compatible |
|
|
| TIP865-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation; async. modes
only |
|
|
| TIP865-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation; async. modes
only |
|
|
| TIP865-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation; async. modes
only |
|
|
| TIP865-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation; async.
modes only |
|
|
| TIP865-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation; async. modes only |
|
|
| TIP865-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation; async. modes
only |
|
|
| TIP865-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation; async. modes only |
|
|
| TIP865-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation; async.
modes only |
|
|
|
8 Channel Serial |
|
|
| TIP866-10 |
8 Channel Serial RS232 IP |
|
|
|
8 channels of high performance
RS232 serial interface; Programmable baud rates up to 115.2 Kbaud; Vectored
interrupt; Support of RxD, TxD, RTS,
CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per
channel, programmable trigger levels for FIFO's; ESD protected RS232 line
driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature
0°C to +70°C |
|
|
| TIP866-11 |
8 Channel Serial TTL IP |
|
|
|
8 channels of high performance
TTL serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored
interrupt; Support of RxD, TxD, RTS,
CTS, GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per
channel, programmable trigger levels for FIFO's; Operating Temperature 0°C to
+70°C |
|
|
| TIP866-20 |
8 Channel Serial RS422 IP |
|
|
|
8 channels of high performance
RS422 serial interface; Programmable baud rates up to 460.8 Kbaud; Vectored
interrupt; Support of RxD+/-, TxD+/-
and GND per channel; 64 byte receive FIFO and 64 byte transmit FIFO per
channel, programmable trigger levels for FIFO's; ESD protected RS422 line
driver/receiver up to 15KV according to IEC1000-4-2; Operating Temperature
0°C to +70°C |
|
|
| TIP866-TM-10 |
8 Channel Transition Module |
|
|
|
Transition module for TIP866 and
TIP867, provides 8 DB-25 connectors mounted in 6U 8TE front panel |
|
|
| TIP866-TM-20 |
8 Channel Transition Module |
|
|
|
Transition module for TIP866 and
TIP867, provides 8 RJ45 connectors mounted in 6U 4TE front panel |
|
|
| TIP866-TM-30 |
16 Channel Transition Module |
|
|
|
Transition module for TIP866 and
TIP867, provides 16 4-pin RJ connectors mounted in 6U 4TE front panel |
|
|
| TIP866-IO-10 |
Mounting
Rail I/O Module |
|
|
|
Mounting Rail I/O module for
TIP866, provides 8 DB-9 connectors, 50 pin flatcable |
|
|
| TIP866-DOC |
User Documentation for TIP866 |
|
|
| TIP866-EK |
Engineering Kit for TIP866 |
|
|
|
Includes user documentation
TIP866-DOC; Schematics; Data sheets for serial controller; 50 pin terminal
block; 50 pin flat cable |
|
|
| TIP866-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP866-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP866-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation |
|
|
| TIP866-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation |
|
|
| TIP866-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation |
|
|
| TIP866-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation |
|
|
| TIP866-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation |
|
|
| TIP866-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation |
|
|
|
|
|
| TIP867-10 |
8 Channel Serial RS485 IP |
|
|
|
8 channels of high performance
RS485 serial interface; Programmable baud rates up to 2 Mbaud; Vectored
interrupt; Support of Dx+/-, and GND
per channel; 8 byte receive FIFO and 4 byte transmit FIFO per channel; Transition
modules TIP866-TM-x0 can be used; Operating Temperature 0°C to +70°C |
|
|
| TIP867-20 |
8 Channel Serial RS485 IP |
|
|
|
same as TIP867-10 but support of
Dx+/- , CLK+/- and GND per channel |
|
|
| TIP867-DOC |
User Documentation for TIP867 |
|
|
| TIP867-EK |
Engineering Kit for TIP867 |
|
|
|
Includes user documentation
TIP867-DOC; Schematics; Data sheets for serial controller; 50 pin terminal
block; 50 pin flat cable |
|
|
| TIP867-SW-12 |
OS-9 Software Support |
|
|
|
OS-9 V 3.0 (68K), OS-9 V 2.2
(PPC); Device driver; Source code; Programmer documentation; async. modes
only |
|
|
| TIP867-SW-32 |
pSOS Software Support |
|
|
|
pSOS+ V 2.3 (68K), pSOS+ V 2.5
(PPC); Device driver; Source code; Programmer documentation; async. modes
only |
|
|
| TIP867-SW-42 |
VxWorks Software Support |
|
|
|
VxWorks V 5.4 (68K), VxWorks V
5.4 (PPC); Device driver; Source code; Programmer documentation; async. modes
only |
|
|
| TIP867-SW-62 |
Windows NT 4.0 Software Support |
|
|
|
Support only for carrier boards
of TEWS TECHNOLOGIES and cPCI/PCI
carriers of SBS Technologies; Device driver; Programmer documentation; async.
modes only |
|
|
| TIP867-SW-72 |
LynxOS Software Support |
|
|
|
LynxOS V 3.0.1 and V 3.1.0a;
Device driver; Source code; Programmer documentation; async. modes only |
|
|
| TIP867-SW-82 |
LiNUX Software Support |
|
|
|
LiNUX Kernel Version 2.2.13 –
2.4.4; Device driver; Source code; Programmer documentation; async. modes
only |
|
|
| TIP867-SW-92 |
QNX 4 Software Support |
|
|
|
QNX 4 V 4.24; Device driver;
Source code; Programmer documentation; async. modes only |
|
|
| TIP867-SW-95 |
QNX 6 Software Support |
|
|
|
QNX 6 (Neutrino) V 6.0.0 (Patch
B) – V 6.1.0; Device driver; Source code; Programmer documentation; async.
modes only |
|
|
|
Various |
|
|
|
Universal Transition Module |
|
|
| TIP001-TM-10 |
Universal Transition Module |
|
|
|
Transition module providing all
50 IP I/O lines on a plugable screw terminal at the 6U front panel |
|
|
|
|
|
|
IP Hardware Kit |
|
|
| TIPxxx-HK |
IP Hardware Kit |
|
|
|
Contains srews and spacers required to fix a single size IP
on a carrier |
|
|
|
|
|
|
|
|
|
|